Movable seedbed wire mesh standard size is 2.5m×1.65m×0.75m(L×W×H), customization is also acceptable according to requirement, Aperture of movable seedbed is 130 mm × 30 mm (L × W),The position of seedbed could be fine-tuned by hand-wheel.
1. Manual drive, ease operation and movement. Seedbed border for the aluminum alloy, The surface treatment of steel pipe bracket portion and seedbed networks are hot dip galvanizing
,particularly suitable for hot and humid environment greenhouse.
2. The range of Trimming is 300mm, The utilize of greenhouse area is upon 80%.
3. Anti-tilt device prevent the problem of inclination caused by emphasis.

Movable seedbed configuration instructions:
The amounts of movable Greenhouse seedbed based on the actual production of greenhouse or
nursery area
The life of mobile seedbed:
The life of Textile Network part is 20 years, other structures for 10 years.

The type of process characteristics:
1, electro galvanized: beautiful and low cost;
2, hot dip galvanized: beautiful ,thickness galvanized ,corrosion resistance for greenhouse
environment is more ideal;
3, electro-galvanized + electrostatic spray: nice looking, double corrosion ,moderate prices;
4, hot dip: Eye-catching appearance and corrosion resistance are particularly suitable for hot
and humid greenhouse environment.